SAVER AT Asset Tracker
The SAVER AT is a real-time tracking instrument, with full-waveform data capture, using on-board GPS and cellular hardware. SAVER AT provides proactive notification by the instrument, including full event time-history data, when predetermined triggers occur. The SAVER AT measures and displays shock, temperature, relative humidity, atmospheric pressure, tilt orientation, and battery life and network connectivity. The SAVER AT incorporates a light sensor, providing indication and notification if and when a vehicle or container door has been opened. The USB connection allows for the use of external power sources, increasing operational run-time, allowing unlimited measurement and monitoring sessions.
Shown with optional GPS/Cellular cable and common/shared antenna
SAVER AM possesses all the same functionality, but no cellular and GPS connectivity.
- Full waveform data recorder
- User-programmable trigger threshold
- User-defined pre-trigger recording (so you know what happened before the event took place)
- LED alarm indicator for shock, Temp/RH, Remaining Battery Life, Atmospheric Pressure, Tilt and Network Connectivity (GPS/Cellular)
- Push button, delayed start or instantaneous activation
- USB and Wireless connectivity for communication and instrument power
- Rechargeable Li-ion Battery (UN 38.3 Tested)
- Light sensing
- Envelope Size: 4.4 x 3.5 x 2.1 in. (112 x 89 x 53.3 mm) – External Antenna
- Acceleration Range: 200g (full scale)
- Accelerometer Type: Triaxial piezoelectric
- Sampling Rates: 500, 1000, 2500 and 3000 samples per second
- A/D Conversion: 12-bit
- Anti-Alias Filter: 5-pole, low pass filter 50, 100 and 300 Hz
- 3-dB Frequency Response: 0.5 Hz to filter setting
- Temperature Measurement Range: -20° to 60°C (-4° to 140°F)
- Humidity Measurement Range: 5% to 95% RH, non-condensing
- Atmospheric Pressure Measurement Range: 10 to 1100 mbar
- Tilt Detection: +/- 45 degrees from orientation
- Light Detection: On / Off
- Light Sensor Measurement: 0 to 2000 Lux
- Memory Retention Modes:
- Signal – Top 400 Events (Max Overwrite)
- Timer – Fill Stop – up to 10,000 events (static measurements)
- Certifications:
- CE
- FCC Part 15
- IP 67
- Mounting kits including magnets and other attachment hardware
- External power for extended run-time
- Data Analysis Services
Magnetic Mount
External Power Options
Data Reporting Services
