SAVER™ Shock And Vibration Field Data Loggers
Lansmont’s Portable SAVER™ shock and vibration data loggers (also know as data recorders) use internal triaxial accelerometers to autonomously measure and record tens of thousands of targeted acceleration time-history events of interest. The collected shock, impact and vibration data allows for assessment and characterization of both the dynamic and atmospheric hazards present within transportation and in-use environments. All SAVER data loggers use our SaverXware operating software, which allows for user-defined programming of the loggers, as well as data analysis and reporting.
Our SAVER products are organized into two categories, based upon their primary applications – Monitoring and Measurement.
Monitoring applications record and log only those key events when user-defined threshold criteria are exceeded. These applications are valuable when users have established “not-to-exceed” event amplitudes associated with their products and cargo.
Measurement applications record thousands of shock and vibration events, allowing for complete, detailed characterization and analysis of targeted transport and in-use environments. In addition to triaxial acceleration data, SAVER shock and vibration data loggers also log the date, time, temperature and humidity associated with each recorded event. Some SAVER products also have the ability to log and report on atmospheric pressure, tilt and GPS location. Click the + symbol to expand the SAVER Product Comparison Matrix below for a comparison of Lansmont’s SAVER shock and vibration data loggers.
|Model||SAVER 9X30||SAVER 3X90||SAVER 3D15||SAVER AM|
|Size||5.0 x 4.9 x 1.7 in. (127 x 124 x 43 mm)||3.7 x 2.9 x 1.7 in. (95 x 74 x 43 mm)||3.7 x 2.9 x 1.7 in. (95 x 74 x 43 mm)||2.8 x 3.6 x 1.3 in. (71 x 91 x 33 mm) w/flanges|
|Weight||35.0 oz. (1 kg)||16.7 oz. (473 g)||16.7 oz. (473 g)||10.0 oz. (283 g)|
|Triggering||threshold & timer||threshold & timer||threshold & timer||threshold & timer*|
|Memory||128 MB||128 MB||128 MB||400 largest events|
|Sampling||50-10,000 sps||50-5,000 sps||50-5,000 sps||100-3,000 sps|
10, 20, 25, 50, 100, 200, 250, 500
Ext. channels: 1,000, 2,000, 2,500
|10, 20, 25, 50, 100, 200, 250, 500||10, 20, 25, 50, 100, 200, 250, 500||50, 100, 250, 300|
|Continuous Record Time||30 days||90 days||15 days||30 days|
|Accel Type||triax piezoelectric||triax piezoelectric||triax MEMS||triax piezoelectric|
|Accel Range||200 g||200 g||50 g||100 g or 200 g (selectable)|
|3db Response||0.4 Hz to filter maximum||0.4 Hz to filter maximum||0.0 Hz to filter maximum||0.5 Hz to filter maximum|
|GPS Location||optionally embedded||able to import external data||able to import external data||able to import external data|
|External Channels||6 programmable|
- SAVER AM timer sampling for climatic measurements only
SAVER™ 9X30 Shock and Vibration Field Data Recorder
The SAVER™ 9X30 is a complete, research grade shock and vibration field data recorder, with both internal and external acceleration measurement for Shock, Vibration, as well as Temperature & Humidity, Pressure and options for GPS location. When the application requires research quality data – SAVER™ is the answer. The SAVER™ 9X30 is powered with 9V lithium (or alkaline) batteries and will continuously sample the environment for up to 30 days. SAVER 9X30 can be setup to record signal-triggered and time-triggered events.
Shock and Vibration Field Data Recorder
The SAVER 9XGPS is an enhanced version of SAVER 9X30 Measurement Data Recorder that adds built-in GPS capabilities. Adding GPS coordinates to recorded data allows event location and vehicle speed to automatically be embedded into captured data files. This adds further value and definition to your measurement results.
Shock and Vibration Field Data Recorder
The SAVER 3X90 is the most popular SAVER Measurement Data Recorder–combining everything you need into a single small package. SAVER 3X90 is powered with 9V lithium (or alkaline) batteries and provides continuous operation for up to 90 days. The internal triaxial accelerometer and temperature and humidity sensor can be used to record both signal-triggered events (data recorded when exceeding a threshold) and timer-triggered events (data recorded on a time interval).
SAVER 3D15 Shock and Vibration Field Data Recorder
The SAVER 3D15 Measurement Data Recorder is intended for applications where DC-response recording capabilities are required. Most often these are low frequency measurements such as amusement park rides, aerospace flight applications, rail-car coupling impacts, and vehicle crash testing. SAVER 3D15 is the first model to use MEMS technology accelerometers with DC response measurement capability. This instrument is equipped with an internal triaxial accelerometer and will take measurements for up to 15 days.
SAVER AM Shock and Vibration Data Logger
The SAVER AM Asset Monitor Logger provides an autonomous, rechargeable platform for monitoring the movement of critical assets throughout the supply chain. It utilizes an internal triaxial accelerometer, as well as temperature, relative humidity, atmospheric pressure, orientation and light sensors.
SAVER 3M30 & 3M30 PLUS (discontinued)
The SAVER 3M30 and 3M30 PLUS instruments are no longer production items within Lansmont. Our new SAVER AM Asset Monitor is the replacement and upgrade path for both. Lansmont will continue to support both the 3M30 instruments with repair and calibration services.
To learn more about the SAVER AM Asset Monitor, click below:
SaverXware – Data Logger Setup and Analysis Software
SaverXware is the software platform provided to setup and communicate with any SAVER model. SaverXware allows the user to define and export the setup details to the SAVER, check the status of the SAVER, and import (download) any data that the SAVER has recorded. SaverXware is also used to process and analyze the collected data.