SAVER™ AM - Asset Monitor
Shock and vibration data logger
The SAVER™ AM is a high-performance data logger, providing an autonomous, rechargeable platform for monitoring the movement of critical assets throughout the supply chain.
Products
Lansmont test solutions are used to simulate real-world impact and vibration dynamics in controlled laboratory environments.
Lansmont covers many complementary tests, such as drop tests, compression tests, horizontal impact tests and more.
Environmental data recorders
Whether sending a satellite into orbit or receiving a load of fresh produce, you need to know that your products will maintain their integrity during transit.
SAVER 3D15
Shock and vibration field data recorder
The SAVER 3D15 is intended for measurement applications where DC recording capabilities are required. Most often these are low frequency measurements.
SAVER 9X30
Shock and vibration field data recorder
The SAVER™ 9X30 is our most capable shock and vibration field data recorder. It can record up to 9 dynamic channels – using its internal triaxial accelerometer as well as 6 external accelerometer inputs.
SaverXware
Data recorder setup and analysis software
SaverXware allows you to communicate with your SAVER device before testing and analyze drop height, impact, vehicle motion, vibration & more afterward.
เครื่องบันทึกข้อมูลสิ่งแวดล้อม
ไม่ว่าจะส่งดาวเทียมขึ้นสู่วงโคจรหรือรับผลิตผลสดจำนวนมาก คุณต้องรู้ว่าผลิตภัณฑ์ของคุณจะคงความสมบูรณ์ในระหว่างการขนส่ง
SAVER 3X90
เครื่องบันทึกข้อมูลภาคสนามการสั่นสะเทือนและการสั่นสะเทือน
SAVER 3X90 ที่ได้รับรางวัลเป็นเครื่องบันทึกข้อมูลภาคสนามที่ "ดีที่สุดในชั้นเรียน" เครื่องมือที่ขับเคลื่อนด้วยตัวเองนี้มีความละเอียด 16 บิต ตัววัดความเร่งแบบสามแกนภายใน และเซ็นเซอร์อุณหภูมิและความชื้น
SAVER 9XGPS
เครื่องบันทึกข้อมูลภาคสนามการสั่นสะเทือนและการสั่นสะเทือน
ความสามารถ GPS ในตัวทำให้สามารถฝังข้อมูลตำแหน่งและความเร็วลงในไฟล์ข้อมูลที่บันทึกได้โดยตรงโดยอัตโนมัติ
เครื่องทดสอบแรงอัด
ตรวจสอบให้แน่ใจว่าบรรจุภัณฑ์ของคุณสามารถทนต่อแรงกดได้ด้วยการทดสอบแรงกดอย่างเต็มรูปแบบของเรา
Squeezer Pro
เครื่องทดสอบแรงอัด
SqueezerPro เป็นเครื่องมือที่มีประโยชน์สำหรับการวิจัยผลกระทบของสื่อต่างๆ ของบอร์ด การปิด พาร์ติชันภายใน และตัวแปรการออกแบบกล่องอื่นๆ ต่อประสิทธิภาพการรับแรงอัด
Compression testers
Make sure your packaging can stand up to pressure with our full range of compression tests.
122-15
Compression Tester
The 122-15 Compression Tester is a servo-hydraulic solution for testing the compressive strength of larger pallets, units & loads. View the features here!
152-30
Compression Tester
Lansmont's Model 152-30 compression tester can be installed on any reinforced concrete floor (ground level recommended).
152-50
Compression Tester
The 152-50 Compression Tester allows you to test the compressive strength of shipping containers, larger pallets and large bulk containers. Learn more!
TouchTest
Compression control system
Lansmont's touchtest compression 3 (TTC3), the latest version of our TouchTest Compression control system, adds many new and powerful features.
Drop testers
Precision drop testers deliver accurate testing and repeat it quickly for maximum efficiency.
PDT 80M
Precision Drop Tester
A low cost precision drop tester, the PDT 80M consists of a drop leaf assembly housed in a cast aluminum structure.
PDT 300
Precision Drop Tester
The PDT 300 accommodates drop testing applications for large products and packages such as returnable bulk containers, crated products, or palletized products weighing up to 661 lbs. (300 kg).
PDT 700
Precision Drop Tester
The PDT 700 facilitates precision drop testing of large test items weighing up to 1540 lbs. (700 kg).
QR 3000
Quick Release Drop Tester
The QR 3000 Quick Release Drop Tester allows you to test larger, bulkier items weighing up to 3000 lbs. View a complete list of features and specs here!
เครื่องทดสอบการตก
เครื่องทดสอบการตกอย่างแม่นยำให้การทดสอบที่แม่นยำและทำซ้ำได้อย่างรวดเร็วเพื่อประสิทธิภาพสูงสุด
PDT 80
เครื่องทดสอบการตกอย่างแม่นยำ
เครื่องทดสอบการตกกระแทกที่มีความแม่นยำสูงซึ่งได้รับความนิยมสูงสุดของเรา พร้อมด้วยตัวควบคุมแบบมือถือและรอกไฟฟ้าสำหรับการทดสอบการตกกระแทกของชิ้นงานที่มีน้ำหนักไม่เกิน 177 ปอนด์ (80 กก.) จากความสูง 1-72 นิ้ว (2.5-183 ซม.)
Inclined impact testers
Our systems make it easy to perform impact testing that is reliable and safe.
IT 152-4K
Inclined Impact Tester
The IT 152-4K performs inclined impact tests which simulate distribution handling hazards. Our design meets traditional industry specifications with the added benefits of some innovative design ideas.
IT 213-6K
Inclined Impact Tester
The IT 213-6K performs inclined impact tests which simulate distribution handling hazards. Our design meets industry specifications with the added benefits of some innovative design ideas.
Mechanical shakers
Our mechanical shakers provide entry level vibration testing to evaluate repetitive shock.
MS2000
Mechanical Shaker
The MS 2000 operates on an eccentric cam principle, and can be easily adjusted to perform circular-synchronous or vertical linear motions.
MS400
Mechanical Shaker
The MS 400 performs repetitive shock, loose load, or bounce tests, it can handle individual packages or containers weighing up to 400 lbs(181 kgs).
Shock testers
Precision shock systems ensure components and products stand up to real-world hazards.
Model 15D
Shock test system
Lansmont's Model 15D Shock Test System is a popular choice for testing small, lightweight components and devices. Contact us for more details.
Model 23
Cushion shock test system
The Model 23 cushion tester is a unique test system designed for evaluating the impact performance of cushioning materials. Contact Lansmont today!
Model 23D
Shock test system
Equipped with a multi-sided magnesium shock carriage, allowing for test items to be mounted in multiple orientations simultaneously, and ideal for half sine shock pulses.
Model 65/81
Shock test system
The Model 65/81 shock test system among our most popular models for testing small to mid-size components and systems, its combination of table size, payload capacity and pulse quality is the preferred choice for many applications.
Model 65/81D
Shock test system
Our Model 65/81D shock test system has an extended drop height and includes a special 'low impulse kit' for more precise performance when generating low energy shock pulse, commonly used for operational qualification testing.
Model 95/115
Shock test system
The Model 95/115 shock test system provides a larger table surface area and higher payload capacities, from 1,000 lbs (454 kg) to 2,500 lbs (1,135 kg).
HS15 / HS30
High speed shock test systems
Our high speed HS15/30 shock test systems are ideal for smaller test specimen, with peak acceleration up to 6,000 g and max velocity change of 120 ft/sec (36.6 m/sec).
HS16
High speed shock test system
Generate higher energy impacts with velocity changes up to 120 ft/sec (36.6 m/sec) on payloads weighing upto 110 lbs (50 kg). TouchTest Shock 2 controller included as standard.
HS45
High speed shock test system
HS45 high speed shock test system can generate higher energy impacts with velocity changes up to 60 ft./sec (18.3 m/sec) on payloads of up to 220 lbs (100 kg).
HSX15 / HSX30
Extreme high speed shock test systems
Our extreme high speed HSX15/30 systems are fitted with table acceleration boost systems, delivering peak acceleration of 10,000 g, maximum velocity change of 150 ft/sec (45.8 m/sec), for smaller test items up to 250 lbs (113 kg).
HSX20
Extreme high speed shock test system
The extreme high speed HSX20 system is fitted with table acceleration boost systems, delivering peak acceleration of 10,000 g, maximum velocity change of 150 ft/sec (45.8 m/sec), and min pulse direction of 0.2 ms (half sine), for test items up to 250 lbs (113 kg).
HSX30 / HSX60
Extreme high speed shock test systems
Our extreme high speed HSX15/30 systems are fitted with table acceleration boost systems, delivering peak acceleration of 7,500 g (<100 lbs payload), maximum velocity change of 100 ft/sec (30.5 m/sec), with a freefall payload capacity of 2,000 lbs (907 kg) or accelerated payload capacity of 250 lbs (113 kg).
HSX45
High speed (extreme) shock test system
A HSX45 Shock Test System with high acceleration pulses for quality & reliability testing is offered by Lansmont corporation. Call us today for more details
Model 122
Shock Test System
The Model 122 includes a TouchTest Shock 2 Table Top Control Console. Contact Lansmont for further details for the model 122 shock test system.
Model 152
Shock Test System
The Model 152 Shock Test System payload capacity & large table size make it a versatile platform for testing larger products and more! Learn more here.
Model 23
Shock Test System
The Model 23D shock test system generates nearly ideal half sine shock pulses and allows for mounting test items in multiple orientations simultaneously.
Model 95/115D
Shock Test System
The Model 95/115D Shock Test System performs shock tests with pulse quality superior to other systems of comparable size. Call us at today for more info.
Model HC18
High cycle shock test system
The HC18 High Cycle Shock Test System is designed for shock test procedures that require subjecting the test item to numerous consecutive impacts.
Model HC23
High cycle shock test system
The HC23 High Cycle Shock Test System provides high quality shock pulse capability with the added benefit of a much faster cycle time.
P122
Shock testing system
The P122 shock testing system is a higher performance version of the standard Model 122 design. Contact us if you need this high performance machine.
P23
Performance shock test system
The P23 Shock Test System can accommodate heavier payloads and perform higher energy impacts than the standard Model 23.
P30
Performance shock test system
The P30 Performance Shock Test System was developed for consumer electronic testing applications. Contact Lansmont today for further details regarding this product.
P40
Peformance shock test system
The P40 Shock Test System was developed for consumer electronic testing applications. Contact Lansmont today for further details regarding this product.
P55
Performance shock test system
The P55 Shock Test System is a versatile machine design. Contact Lansmont today for further details regarding this machine.
P65 / 81
Performance shock test system
The P65/81 Shock Test System is a higher performance version of the popular Model 65/81 design. Contact Lansmont for more information.
P95/115
Performance shock test system
Lansmont's P95/115 Shock Test System can be equipped with optional shock pulse programmers to generate a wide range of half sine pulses & more.
TouchTest Shock (TTS)
Shock system touch controller
Designed for ease of use and testing efficiency, to get the most from your Lansmont shock testing system.
Test Partner™
The standard for acquisition and analysis of data from drop, shock, and impact events.
Lansmont TP3 ETC
Shock analyzer event
Test Partner 3 is a unique combination of software & hardware specifically developed to capture and analyze transient shock events.
Test Partner™ 3
Shock hardware and software
Test Partner 3 Mini data acquisition system offers plug-and-play simplicity, including 'Lite' or 'ETC' software.
Test Partner™ 4
Shock data acquisition system
Our latest generation data acquisition system, test partner 4 has been designed to analyze dynamic events as well as analog event detection.
TP3 LITE
Drop/shock package designer
TP3 LITE is the best companion for the package designer needing to test drop/shock performance of their designs. Avail tp3 lite when you need best quality results.
การเร่งความเร็ว TruMotion™
จำลองแรงอินพุตความถี่ต่ำในระยะเวลานาน (ไม่มีผลกระทบ) ที่เกี่ยวข้องกับการเร่งความเร็ว การเลี้ยว และการเบรกของยานพาหนะ
เลื่อนการเร่งความเร็ว
ระบบทดสอบความเสถียรของโหลดยูนิต TruMotion™
จำลองแรงป้อนเข้าในระยะเวลานานและความถี่ต่ำที่เกี่ยวข้องกับการเร่งความเร็ว การเลี้ยว และการเบรกของรถ
Vibration testers
Hydraulic vibration systems simulate the effects of transportation to protect shipments.
Model 1000
Vertical vibration test system
Lansmont has designed model 1000 specially for testing small products or packages.
Model 1800
Vertical vibration test system
Lansmont's Model 1800 is one of the most popular model in vibration test systems. This is a good fit for many product and package testing applications.
Model 6200
Vertical vibration test system
Lansmont Model 6200 Vibration Test System has a longer stroke actuator designed for performing low frequency, high energy vibration test profiles.
Model 7000
Vertical vibration test system
This Model might be the best choice for testing heavier test items or palletized loads. Contact us to get info regarding Model 7000 Vibration Test System.
Model 10000
Vertical vibration test system
Lansmont's Model 10000 Vibration Test System, with its greater actuator force & large table options, is geared toward testing unit loads & more!
Model 15000
High performance
The Lansmont Model 15000 vibration test system is the largest stroke actuator in the current Lansmont vibration product line.
Model 28000
Vertical vibration test system
The Model 28000 Vibration Test System is designed for either distribution-type tests with extreme payloads or high performance testing for product evaluations.
Model 56000
High performance
The Lansmont Model 56000 vibration test system utilizes dual 28000 vibration test systems working together in tandom to create large scale high performance.
Model 6000H
Horizontal vibration systems
The Lansmont Model 6000H was designed to perform a wide range of horizontal vibration testing, including sine, random, and Field-to-Lab® test protocols.
Model 65000
Vertical vibration test system
The Model 65000 Vibration Test System is a highly custom vibration system- tailored specifically to any extreme payload vibration testing application.
TouchTest
Vibration controller
TTV2 is the only fully integrated control system available for servo-hydraulic vibration systems. Find out more with Lansmont today!